RC Car racing merch from Oval RC
RC Car racing merch from Oval RC
Signed in as:
filler@godaddy.com
2024 Class Rules:
BL2 Sportsman
- Base vehicle
Traxxas Slash 2wd #58024
Traxxas Slash 2wd # 58034-1
Traxxas Raptor 2wd #58094-1
Traxxas Slash 2wd kit #58014-4
- General Chassis Rule
All parts and components Must be stock Traxxas Slash 2wd short course truck
Unless mentioned below
- Body
Current style, Northeast dirt modified style body from any manufacture allowed
Sail panels NOT allowed in stock 12T class
Plastic .030 minimum Thickness, NO Floppy Bodies
- Bumpers
Traxxas stock front bumper must be removed
Traxxas TRA2735 front bumper allowed must be installed angled down
Traxxas rear bumper allowed
RPM rear bumper Allowed
Front clips to hold nose in place allowed
Traxxas side bumpers may or may not be used
- Rear Bumper
May be required by certain tracks, check with your local track
- Chassis Components
* HCG only (stock Traxxas Slash high center gravity chassis only)
No modifications to the chassis or transmission case,
Must remain stock no cutting or drilling of parts
Must have Stock Traxxas Slash Parts unless mentioned in rules
A-arms must be mounted in correct locations no flopping
Right A-arms must be mounted on the right and Left on the left side
No RPM or aftermarket parts allowed. RPM rear bumper may be used
All factory adjustment mounting locations may be used
No cutting of parts
- Steering components
Must be stock bellcrank set found on kit or RTR
Traxxas TRA6845X Bellcrank kit will be allowed
No aluminum parts
- Electronics mounting locations
may be mounted anywhere on top of the chassis
No additional holes may be drilled
additional mounting plates allowed must use existing holes
2 sided tape allowed to mount electronics
-Suspension
Traxxas Slash stock shocks grey or black color allowed
Shock pistons must be stock 1,2, or 3 hole pistons allowed
Shock limiters may be used to limit travel
Original Traxxas rear shock springs #5858 must be used
Any white Traxxas front shock springs may be used
Up to 5 coils may be cut off one end of the front shock springs
No shimming of parts allowed
No aluminum parts
ANY WEIGHT SHOCK OIL MAY BE USED
- Motor & ESC
Stock BL-2s Motor & BL-2s ESC COMBO ONLY
#3340 Motor fan allowed
- Transmission
STOCK MUST HAVE STOCK SLASH INTERNAL COMPONENTS
NO PLASTIC GEARS
ANY DIFF OIL MAY BE USED
REMOVAL OF THE GREASE AND DIFF OIL IS ALLOWED
ANY BEARINGS MAY BE USED
- Slipper Clutch
Stock slipper clutch and components must be used
- Radio & Receiver
Any
- Servo
Any Servo may be used
Any Servo saver or Servo Horn allowed
May be mounted above or below the chassis
Aluminum Servo horn allowed
- Battery
Any 5200 50c 2s Lipo battery
8.44 max volts checked before race
Any battery connectors may be used
Stock battery brace must be used
Battery brace may be cut
- Rims
Only Traxxas 2.2/3.0 rims allowed
- Wheel spacers (Hexes)
grey or black may be used on the front or back
You may use all grey or all black or a mix of wheel hexes
- Gear
Any pinion or spur gear allowed
Tracks may have a gear rule
- NO WEIGHT MAY BE ADDED TO THE BODY OR CHASSIS
- Tires
Stock Traxxas Slash Kumho, Spec, Bf Goodrich, Any compound allowed
S1 compound allowed
Traxxas tires must have the Traxxas logo in the tire.
Foam inserts must be stock and will be teched against a stock mounted tire
Foams may appear different flattened or expanded due to foam busting
Foams cannot be glued or doubled up
NO AFTERMARKET FOAM INSERTS
Traction Compound Allowed,
Tires may be cut and ground down
- Optional Tires allowed on Indoor Tracks
(Only Allowed on Hardwood, concrete, painted, and epoxy floors)
Duratrax Bandito tires 2.2/3.0 any compound
Proline Hoosier tires 2.2/3.0 any compound
Foam Tires may be used on carpeted surfaces
JACO tires (JAC2055LP) only, may be cut and trued